Painting car with krylon
Posted: Mon Jan 02, 2012 10:31 am
Hi guys, I have a question on painting my sons cars. I have been trying to use krylon and the base coat keeps crinkling after the second coat is applied. Here is what I have been doing.
1:Sand car smooth and clean.
2:Apply krylon primer and allow to dry.
3:Apply krylon gloss black paint and allowed to dry for a little over 2 full days
4:Taped car off for flames and applied yellow krylon over the black and with a min or 2 it crinkled the paint. I did this 2 different times with the same result.
I have done some internet searching and have found many people with this problem. My next step is repainting and put the cars in my powder coating oven set to about 100 degrees and let them dry for a few hours like that and see if that with do it. What are you guys thinking on this.
What paints and methods are you guys doing to get a good paint job.
1:Sand car smooth and clean.
2:Apply krylon primer and allow to dry.
3:Apply krylon gloss black paint and allowed to dry for a little over 2 full days
4:Taped car off for flames and applied yellow krylon over the black and with a min or 2 it crinkled the paint. I did this 2 different times with the same result.
I have done some internet searching and have found many people with this problem. My next step is repainting and put the cars in my powder coating oven set to about 100 degrees and let them dry for a few hours like that and see if that with do it. What are you guys thinking on this.
What paints and methods are you guys doing to get a good paint job.