I'm putting out a feeler for anyone that can make up some custom set of wheels. For our race next month, I am going for design and would like some wheels that better go with the design. I need someone with a lathe that can make me a set of wheels out of delrin, HDPE or similar. I'm willing to pay, as long as it won't blow my budget.
Thanks,
Randy
Custom Wheels?
- gpraceman
- Site Admin
- Posts: 4926
- Joined: Fri Jun 20, 2003 12:46 am
- Location: Highlands Ranch, CO
- Contact:
Custom Wheels?
Randy Lisano
Romans 5:8
Awana Grand Prix and Pinewood Derby racing - Where a child, an adult and a small block of wood combine for a lot of fun and memories.
Romans 5:8
Awana Grand Prix and Pinewood Derby racing - Where a child, an adult and a small block of wood combine for a lot of fun and memories.
Re: Custom Wheels?
I'd offer randy, but sounds outside of my skill set. I only do o.d.
- gpraceman
- Site Admin
- Posts: 4926
- Joined: Fri Jun 20, 2003 12:46 am
- Location: Highlands Ranch, CO
- Contact:
Re: Custom Wheels?
I found some wheels that might work for my design at a hobby store. The problem is each wheel has a bearing pressed into it and then a solid axle connects a pair of wheels. The spacing between the wheels is not sufficient to fit the track. I'm hoping that I will be able to separate them enough to get them to fit without damaging the bearings.
If these work, it is a good thing that our Outlaw division has a 1 lb weight limit, as these wheels, with the axles, weigh in at 5.1 oz.
If these work, it is a good thing that our Outlaw division has a 1 lb weight limit, as these wheels, with the axles, weigh in at 5.1 oz.
Randy Lisano
Romans 5:8
Awana Grand Prix and Pinewood Derby racing - Where a child, an adult and a small block of wood combine for a lot of fun and memories.
Romans 5:8
Awana Grand Prix and Pinewood Derby racing - Where a child, an adult and a small block of wood combine for a lot of fun and memories.