Another canted hole option
Re: Another canted hole option
I've got a couple old 3/8" hand drill chucks laying around. That should work as a pin vise.
- whodathunkit
- Pine Head Legend
- Posts: 2477
- Joined: Sat Apr 25, 2009 5:56 pm
- Location: Forgan, OK
Re: Another canted hole option
Thought I'd share this handy little tool to the topic.
Drill press.. dont have one to use!
The hand drills you have are to heavy to hold and you wish they were smaller in size.
And the pin vise drilling wears your wrist out when drilling alot of axle holes with the jigs by hand.
https://doogsmodelsdotcom.files.wordpre ... 1200&h=960
Might give something like this a try.
Drill press.. dont have one to use!
The hand drills you have are to heavy to hold and you wish they were smaller in size.
And the pin vise drilling wears your wrist out when drilling alot of axle holes with the jigs by hand.
https://doogsmodelsdotcom.files.wordpre ... 1200&h=960
Might give something like this a try.
What type of automobile can be spelled the same forwards & backwards?