Building a wooden track. Which surface?
- pwrd by tungsten
- Master Pine Head
- Posts: 723
- Joined: Wed May 24, 2006 1:51 am
- Location: Seattle, WA
Building a wooden track. Which surface?
Our pack is building a wooden track. Which surface should we use: Formica, varnished wood, etc... Thoughts?
W Racing!!!!
Re: Building a wooden track. Which surface?
I think the answer depends on how consistent you want your racing surface. Varnish, polyurethane, paint or other such finishes can leave a nice surface, but will be inconsistent when applied and cured at home. For example, when applied with a brush the start of the brush stroke will contain more finish than the end of the brush stroke. Wipe-on products can have similar problems. With that said, race tracks have been surfaced with these products since the beginning. Variances in the finish will be minor, but such variances can contribute to the fabled 'slow lane.'
I mentioned appying and curing a finish at home above. Pre-finished plywoods have very consistent finishes since they are machine applied and radio cured within seconds. If you want to go with a natural wood look and a really stable surface, check with a nearby lumber dealer to see if they sell prefinished plywood.
If I were to build a wood track, I would put Formica or other laminate product on the running surface (the tops of the center rails could be finished with anything). Laminates have a very consistent surface. Some laminates look like a paved road, which could be used to make the track look like a real drag strip.
I mentioned appying and curing a finish at home above. Pre-finished plywoods have very consistent finishes since they are machine applied and radio cured within seconds. If you want to go with a natural wood look and a really stable surface, check with a nearby lumber dealer to see if they sell prefinished plywood.
If I were to build a wood track, I would put Formica or other laminate product on the running surface (the tops of the center rails could be finished with anything). Laminates have a very consistent surface. Some laminates look like a paved road, which could be used to make the track look like a real drag strip.
- FatSebastian
- Pine Head Legend
- Posts: 2818
- Joined: Wed Jun 17, 2009 2:49 pm
- Location: Boogerton, PA
Re: Building a wooden track. Which surface?
I suppose that wood, as a natural product, will have variances regardless. Finishing tends to harden and smooth the surface, and this results in faster speeds v. unfinished wood. Faster speed may exaggerate any natural variances between lanes, but natural wood needs to be finished regardless to maintain cleanliness and general protection.BallBoy wrote:Variances in the finish will be minor, but such variances can contribute to the fabled 'slow lane.'
Laminates are an interesting idea, although if I were building a track from scratch, I would also research PVC planking, which is durable and smooth. Aluminum plating from Beta Crafts is another possibility, although heavy and relatively expensive.pwrd by tungsten wrote:Which surface should we use...?
-
- Pine Head
- Posts: 85
- Joined: Sun Mar 24, 2013 11:08 pm
- Location: St. Louis, Missouri
Re: Building a wooden track. Which surface?
I used Baltic Birch plywood for mine. 3/4" thick for the track section connectors and supports, 3/8" thick for the racing surface and 1/4" thick for the guide strips. Finished with shellac. I considered using polyurethane for a finish but I thought the shellac would be easier to repair if (when) it gets damaged.
- whodathunkit
- Pine Head Legend
- Posts: 2477
- Joined: Sat Apr 25, 2009 5:56 pm
- Location: Forgan, OK
Re: Building a wooden track. Which surface?
A little I know ! (About the track seen in this.. Nurdy Derby video.)
The way this wooden track is seen built in the video might just be a little crazy..
or give you some ideas as it's a little different style of track.
https://youtu.be/
http://www.flickr.com/photos/nicknormal/8046108913/" target="_blank
The way this wooden track is seen built in the video might just be a little crazy..
or give you some ideas as it's a little different style of track.
https://youtu.be/
http://www.flickr.com/photos/nicknormal/8046108913/" target="_blank
What type of automobile can be spelled the same forwards & backwards?