Discussions on buying, building or rehabbing a race track. Topics like plans, materials, tools, construction, finishing, commercially available tracks, and so on.
- Posts: 3
- Joined: Mon Nov 25, 2013 2:52 pm
- Location: Orange County, CA
Here's a practice track I just built. 2 lanes with timer based on the Arduino / miscjunk.org design, but with new firmware to ensure consistency.
- Pine Head Legend
- Posts: 6888
- Joined: Sat Jul 05, 2003 7:01 pm
- Location: Morton, Illinois
Consider adding a 1" or 2" thick chunk of memory foam on the stop block. It will gently stop the cars with no rebound. If you make it about 1-1/2" wide and center it, then the front wheels, even if located far forward, will not impact the foam.
Does the slope and profile match what you will be racing on? If not, consider a second project to build one like that! Sometimes the track profile and length play a significant role in performance.
"If it's not for the boys, it's for the birds!"
- Posts: 12
- Joined: Mon Feb 03, 2014 1:47 pm
- Location: COLUMBUS, OH
Nice track. I just purchased the miscjunk board. Did the firmware update come from him?
- Master Pine Head
- Posts: 980
- Joined: Sat Apr 20, 2013 7:26 pm
- Location: Montgomery County, MD
Did you build the track to be side-guided as opposed to center-guided to match what your actual races will be on?