A user of the Arduino timer (http://www.derbytalk.com/viewtopic.php?t=6216) let me know that it failed to work with the latest version (11.x) of GPRM. Its been used successfully with version 10.x so I installed the latest 11.x version and verified that it no longer works.
On the Hardware setup window, the "Start Testing" button was pressed and than "Test Race". The status went to 'Standby' and after 5 seconds or so the following error appeared:
The hardware log showed the following:
Code: Select all
--------------------------------------------->>
Time: 01/23/2012 12:00:20:06 AM Sent LaneMaskReset Command: 'U'
App: GrandPrix Version: 11.0.906.15
Timer: Custom Port: COM6
--------------------------------------------->>
Time: 01/23/2012 12:00:25:12 AM Sent StartGateStatus Command: 'G'
App: GrandPrix Version: 11.0.906.15
Timer: Custom Port: COM6
--------------------------------------------->>
Time: 01/23/2012 12:00:30:17 AM Sent Reset Command: 'R'
App: GrandPrix Version: 11.0.906.15
Timer: Custom Port: COM6
Time: 01/23/2012 12:00:30:50 AM Timer Responded Back:
K<cr><lf>
Here is the serial config used:
Any ideas on what the issue could be? Thanks in advance for any help!
David