FlagMaster II, Drugstore Cowboy and Maverick
The stock car is my favorite, Tanner and I called it Test Car 3 before we painted it. I really hope it preforms. We cut it from a block and used an old belt sander to shape it. I drill pressed 3 holes in the back end at exactly 3/8 of an inch. I purchased lead wire from Randy Davis and cut it to length. and inserted 2 of them (3 would be too heavy). I then cut 2 dowel rods to perfect length and filled the third hole with wood glue, I dropped 3 tungsten cubes inside and then sealed er up tight. the wheels were done 100% as were the slots with Deby Worx Pro tools (the new ones!) Keep checking Maximum Velocity for the new tools to drop!
John's July Cars!
- PinewoodPerformance
- Merchant
- Posts: 164
- Joined: Tue Mar 23, 2004 9:32 am
- Location: London, Ohio
- Contact:
John's July Cars!
Pinewood Performance
www.pinewood-performance.com
http://pinewoodp.proboards29.com (The other Pinewood Message Boards)
www.pinewood-performance.com
http://pinewoodp.proboards29.com (The other Pinewood Message Boards)