Anyone Ever Used One Of These ?

General discussions for car and semi-truck racers.
Post Reply
Ratrodsrule1
Pine Head
Pine Head
Posts: 57
Joined: Mon Feb 17, 2020 6:30 pm
Location: Gulfport, MS

Anyone Ever Used One Of These ?

Post by Ratrodsrule1 »

If So what were the results and were you satisfied with the drill ? Thanks.......RRR
Never mind the link wouldn't work anyway. It was the orange plastic 3 degree rear cant drill guide from the Tread Mill Guy.......RRR
Eagle
Master Pine Head
Master Pine Head
Posts: 229
Joined: Mon Sep 24, 2018 5:03 pm
Location: Fresno, CA

Re: Anyone Ever Used One Of These ?

Post by Eagle »

Something is better than nothing.
If you are wanting accuracy and ability to drill lots of cars for years to come you need a jig with drill bushings.

I recommend the clear jig the Micro makes.
You can purchase it on eBay.
Ratrodsrule1
Pine Head
Pine Head
Posts: 57
Joined: Mon Feb 17, 2020 6:30 pm
Location: Gulfport, MS

Re: Anyone Ever Used One Of These ?

Post by Ratrodsrule1 »

Thanks Eagle. after reading he claims will last 30/40 drills. Plastic made using 3D printer. Don't think I trust it. The Clear jig is great !!
Post Reply