Redesign of Microwizard Freedom start

Manufacturers of The Judge timers. Also manufactures solenoid start gates and light trees.

Moderator: John Shreffler

Post Reply
John Shreffler
Merchant
Merchant
Posts: 163
Joined: Wed Feb 04, 2004 9:32 pm
Location: Vienna, VA
Contact:

Redesign of Microwizard Freedom start

Post by John Shreffler » Fri Mar 17, 2017 12:57 pm

We have completely redesigned the remote controlled start gate mechanism for the aluminum Freedom Track. The new design does not require any modification to the track, and does not even require tools to install. :scratching: (Ok, you will need a pair of pliers to make a quick adjustment to the .062" brass pull rod, and cut off the excess.) But the device itself is attached to the track with VHB tape. Simply peel off the wax paper and press in place.
http://www.newdirections.ws/glm.htm
Image

The Model LT3 Light Tree is on close out at only $50 while supplies last. The LT3 has been replaced by the smaller and much brighter LT4, which can easily be mounted to any track.
Image
http://www.newdirections.ws/lighttree.htm


John Shreffler
Maker of The Judge

Post Reply