Page 1 of 1

DerbyWorx Bundle & other PWD stuff+FREE shipping

Posted: Thu Jun 28, 2012 5:13 pm
by ninjarabbi1997
FREE shipping on everything. PM if you want any of it; whoever PM's first gets it.

DERBY WORX BUNDLE: Retail, $292 + shipping; Your Price: $90 with FREE shipping
DerbyWorx Bundle that is barely used and comes with instructions:
Pro Body Tool 2 kit for BSA with #44 drill bit & instructions: Drilled one car with it. Retail, $12
Pro Hub Tool, retail: $10
Pro Wheel Shaver XT2 with instructions, retail, $38 (shaved 6 wheels with it)
Pro Axle Press 2, retail: $17
Pro Rail Rider: retail $13
Pro Axle Guide, retail $10
Pro Bore Polisher with Novus2 plastic polish & piper cleaners, retail $10
Pro Wheel Mandrel, retail $9
Other Tools included in the bundle:
Precision Wheel Balancer, retail $25
Maximum Velocity Car Balance stand (to check your balance point); retail $7
Doc Jobe Pin Vise & Axle Burnishing cradle, retail, $11
Wheel Alignment Tool, retail, $5.30
Metal Axle file to for removing the burrs and machine extruding marks where the nail head joins the shaft. This step should be done before the axle polishing step is done, retail, $3
3 pine blocks square on every side, and is pre-cut to the standard pinewood derby dimensions of: Height: 1-1/4" x Width: 1-3/4" x Length: 7" (Retail, $10)
Lester Racing 1.25"laser cut balsa weight flare (retail, $7)
Set of 4 DerbyWorx razor wheels ($20)
2 Lester Laser Cut bodies with pre-drilled holes (retail, $20)
1 Derby Evolution Laser Cut body with pre-drilled holes (retail, $10)
1 Derby Evolution laser cut body with cavity balsa filled wih pre-drilled holes (retail, $12)
1 set (4) of 5-17 axles these are nicely grooved axles by AX1000 on ebay, each bent at a 3 degree angle by a special tool develped by a machinist and PWD champion (retail, $12)
1 set of DerbyWorx BSA axles, with CNC machined grooves, each bent at a 3 degree angle by a special tool develped by a machinist and PWD champion (retail, $13)
SuperZ Oil (retail, $8)
"Zero Friction" axle polish (used by a national PWD champion, use as final polishing step), (retail, $5)
Spray can gun handle (makes it easier for kids to spray), (retail, $5)

Image

Other products sold separately, still with FREE shipping:

Precision Carbide Jobber Length Drill bit #43 (from [no advertising for this vendor]), retails $12.50), your price, $6. It was used to drill less than 10 holes.

Image

Old style BSA wheels (3.3g), precisioned machined O.D. and inside edge trued by the Jewkes Engineerin--2 sets (8 wheels total); 4 of them are raced prepped by them for graphite, the other 2 have just been machined. Your price, $5

Precision machined New Style BSA wheels--set of 4--no weight reduced
Wheels were machined on a lathe by a national Pinewood Derby champion, tread and inner edge are trued and NO material was removed from the inside. These were used in one race. there are 4 black wheels. Retail would be $20; your price, $5.

Image

Pinewood Derby Car Racing Canopy
I bought this from Maximum Velocity and never got to use it. Here is a link to show you how to use it on your car for looks: http://www.maximum-velocity.com
Retail: $3.45 + shipping; your cost, $2

Image

7 DerbyWorx BSA Axles with CNC machined grooves, each bent at a 3 degree angle by a special tool develped by a machinist and PWD champion; the angle let's you adjust your wheels to ride camber or to steer for a Rail Rider (retail, $25 + shipping; your cost, $8)

Image


Thanks, Jim