Sync microwizard with software?

Commercial timing systems
Post Reply
JuliePurdy
Apprentice
Apprentice
Posts: 1
Joined: Fri Feb 25, 2011 4:50 pm
Location: Hopewell Jct., NY

Sync microwizard with software?

Post by JuliePurdy »

I have been trying to get my finish line ( microwizard) to sync with 2 different softwares K2 by microwizard and Race pro by BTG neither of them recognize the timer/finish line. Funterm by microwizard does recognize the timer and finish but does not generate heats. I would like to find 1 software that can do both.
User avatar
Stan Pope
Pine Head Legend
Pine Head Legend
Posts: 6856
Joined: Sat Jul 05, 2003 7:01 pm
Location: Morton, Illinois
Contact:

Re: Sync microwizard with software?

Post by Stan Pope »

Since you have trouble connecting from MicroWizard software to MicroWizard hardware, it should be very helpful to have a phone chat with one of the gentlemen at MicroWizard. You can probably even get 'em on a Saturday! If no luck connecting via phone, then drop an email.

It is likely that it is an install/setup problem and that the same fix that gets MWiz software running will also get other software running.
Stan
"If it's not for the boys, it's for the birds!"
User avatar
Stan Pope
Pine Head Legend
Pine Head Legend
Posts: 6856
Joined: Sat Jul 05, 2003 7:01 pm
Location: Morton, Illinois
Contact:

Re: Sync microwizard with software?

Post by Stan Pope »

JuliePurdy wrote:I would like to find 1 software that can do both.
If you strike out with BTG, have a look at GPRM. GPRM is a versatile product with good support. Many installations combine GPRM with MWiz's Fast Track timers successfully.
Stan
"If it's not for the boys, it's for the birds!"
Post Reply