Coke and a smile
Coke and a smile
Well I have decided as I have 11 and a half months to my next PWD that now is the time to start practicing my skills. I had a few left over blocks so I asked my son what we should make. He suggested a Coke bottle. OK says I.... No problem. [img][IMG]http://i1060.photobucket.com/albums/t45 ... G_1294.jpg[/img][/img]
So I bust out my coping saw and dremel. Then I notice, whoops forgot to leave a spot for the front axels No worries say I, we can make it a 3 wheelers
[img][IMG]http://i1060.photobucket.com/albums/t45 ... G_1297.jpg[/img][/img]
So I cut out a central hole for the front wheel. No sure why I decided to cut all the way through and not just cut up from the bottom. Also practiced using the dremel as a router...not so easy to do this free hand. The depth adjusting tools just makes it harder to see what you are doing.
Little paint on the car [img][IMG]http://i1060.photobucket.com/albums/t45 ... G_1307.jpg[/img][/img]
Borrowed a label from a another coke bottle [img][IMG]http://i1060.photobucket.com/albums/t45 ... G_1313.jpg[/img][/img]
Tried to throw in some bottle green paint like the old fashion coke bottles.
Had an extra wheel which made a perfect cap:
[img][IMG]http://i1060.photobucket.com/albums/t45 ... G_1316.jpg[/img][/img]
[img][IMG]http://i1060.photobucket.com/albums/t45 ... G_1315.jpg[/img][/img]
[img][IMG]http://i1060.photobucket.com/albums/t45 ... G_1314.jpg[/img][/img]
So not the best looking car but I am learning to use my dremel and lay down paint. Also toyed with painting the wheels. Next I need to buy some goodies and practice making a fast car...right after I make my daughter a pickle car
Noskills (but working on it)
So I bust out my coping saw and dremel. Then I notice, whoops forgot to leave a spot for the front axels No worries say I, we can make it a 3 wheelers
[img][IMG]http://i1060.photobucket.com/albums/t45 ... G_1297.jpg[/img][/img]
So I cut out a central hole for the front wheel. No sure why I decided to cut all the way through and not just cut up from the bottom. Also practiced using the dremel as a router...not so easy to do this free hand. The depth adjusting tools just makes it harder to see what you are doing.
Little paint on the car [img][IMG]http://i1060.photobucket.com/albums/t45 ... G_1307.jpg[/img][/img]
Borrowed a label from a another coke bottle [img][IMG]http://i1060.photobucket.com/albums/t45 ... G_1313.jpg[/img][/img]
Tried to throw in some bottle green paint like the old fashion coke bottles.
Had an extra wheel which made a perfect cap:
[img][IMG]http://i1060.photobucket.com/albums/t45 ... G_1316.jpg[/img][/img]
[img][IMG]http://i1060.photobucket.com/albums/t45 ... G_1315.jpg[/img][/img]
[img][IMG]http://i1060.photobucket.com/albums/t45 ... G_1314.jpg[/img][/img]
So not the best looking car but I am learning to use my dremel and lay down paint. Also toyed with painting the wheels. Next I need to buy some goodies and practice making a fast car...right after I make my daughter a pickle car
Noskills (but working on it)
"Nunchuk skills... bowhunting skills... pinewood derby skills... Girls only want boyfriends who have great skills!"
Napoleon Dynamite
Napoleon Dynamite
Re: Coke and a smile
I think none of my pictures came up:
Lets see if that works!
Noskills
Lets see if that works!
Noskills
"Nunchuk skills... bowhunting skills... pinewood derby skills... Girls only want boyfriends who have great skills!"
Napoleon Dynamite
Napoleon Dynamite
- whodathunkit
- Pine Head Legend
- Posts: 2477
- Joined: Sat Apr 25, 2009 5:56 pm
- Location: Forgan, OK
Re: Coke and a smile
Noskills,
WOW!!!! for crativity..
You crack me up with Coke & a
You may find you need a wider dfw.. so that it dousent fall down inside
the slot in the track for the starting peg.
But your getting the hang of it Noskills.
WOW!!!! for crativity..
You crack me up with Coke & a
You may find you need a wider dfw.. so that it dousent fall down inside
the slot in the track for the starting peg.
But your getting the hang of it Noskills.
What type of automobile can be spelled the same forwards & backwards?
- FatSebastian
- Pine Head Legend
- Posts: 2818
- Joined: Wed Jun 17, 2009 2:49 pm
- Location: Boogerton, PA
Re: Coke and a smile
Imaginative!
Might make for a useful Super Track design!
Even if it gets past the slot for the peg, it would not likely stay on the track. The front wheel would ride on top of the central guide rail. I've seen similar designs which roll off the track almost immediately.whodathunkit wrote:You may find you need a wider dfw.. so that it dousent fall down inside the slot in the track for the starting peg.
Might make for a useful Super Track design!
Re: Coke and a smile
Cool looking car. I even like how you put the frost on it.
Paul
Paul
- Darin McGrew
- Pine Head Legend
- Posts: 1825
- Joined: Fri Jul 18, 2003 1:23 pm
- Location: Knoxville, TN
- Contact:
Re: Coke and a smile
That's a very creative design! Thanks for sharing!
It definitely wouldn't work on our track. The front wheel would drop into the slot for the starting "pins" (which are aluminum bars 1 inch wide), and the car wouldn't make it further than a few inches.
I've seen a number of kids come up with designs with a single centered front wheel. To meet our "must fit the track" rule, I've shown them how to rework the design to use two front wheels, supported by struts. The struts don't have to be very big, and you can paint them black so they disappear visually. The front of the car ends up shaped something like this:
It definitely wouldn't work on our track. The front wheel would drop into the slot for the starting "pins" (which are aluminum bars 1 inch wide), and the car wouldn't make it further than a few inches.
I've seen a number of kids come up with designs with a single centered front wheel. To meet our "must fit the track" rule, I've shown them how to rework the design to use two front wheels, supported by struts. The struts don't have to be very big, and you can paint them black so they disappear visually. The front of the car ends up shaped something like this:
Code: Select all
________
| |
| |
| |
| |
______/ \______
| / \ |
|____/ \____|
/ \
/ \
/ \
/ \
| |
| |
| |
| |
Re: Coke and a smile
I like how the extra wheel was used as the bottle cap...
Re: Coke and a smile
Found the 4th wheel
Darin, thanks for the feedback. I have does this once for a carrotcar I made but this time I just forgot-too excited to bust out the Dremel I guess. Man that little tool si fun.
Noskills
Darin, thanks for the feedback. I have does this once for a carrotcar I made but this time I just forgot-too excited to bust out the Dremel I guess. Man that little tool si fun.
Noskills
"Nunchuk skills... bowhunting skills... pinewood derby skills... Girls only want boyfriends who have great skills!"
Napoleon Dynamite
Napoleon Dynamite