Solenoid Start Gate Circuit
- gpraceman
- Site Admin
- Posts: 4926
- Joined: Fri Jun 20, 2003 12:46 am
- Location: Highlands Ranch, CO
- Contact:
Re: Solenoid Start Gate Circuit
Either you will need to control the timer on one COM port and the solenoid on the other or build a port splitter (1 DB9F and 2 DB9M) and wire it up accordingly.
Personally, I favor not activating the solenoid with the computer. I have a remote switch that I plug into my solenoid unit and I call up the racer in the first lane of each heat to start it. They like it, as it gets them more involved in the race.
Personally, I favor not activating the solenoid with the computer. I have a remote switch that I plug into my solenoid unit and I call up the racer in the first lane of each heat to start it. They like it, as it gets them more involved in the race.
Randy Lisano
Romans 5:8
Awana Grand Prix and Pinewood Derby racing - Where a child, an adult and a small block of wood combine for a lot of fun and memories.
Romans 5:8
Awana Grand Prix and Pinewood Derby racing - Where a child, an adult and a small block of wood combine for a lot of fun and memories.
Re: Solenoid Start Gate Circuit
Ok, thanks Randy.
I do plan on having race lane #1 start the race. I thought ti might be nice to have computer control, but based on you advice I am going to forgo the effort.
Thanks. The Software has been a real joy to use, well though out.
I do plan on having race lane #1 start the race. I thought ti might be nice to have computer control, but based on you advice I am going to forgo the effort.
Thanks. The Software has been a real joy to use, well though out.
Re: Solenoid Start Gate Circuit
If I am using a 12V DC 1.5 amp wall wart for power, and NOT using GPRM to trigger the solenoid do I need to do anything other than wire the solenoid to power with a N.O. Switch?
Re: Solenoid Start Gate Circuit
An update on my start solenoid.
I used the car door lock style actuator, and found it easy to mount with just a plate of 1/8 aluminum attached to the track wit the standard captive nuts and bolts, and then tapped the plate for #6-32 bolts that fit through the mounting holes.
I have this powered by a 12 volt 1.5 amp wall wart. I am running no circuit beyond that and just using it as a manual start gate. Hundreds of activations and it works great. I did make my own start lever out of 3/16" aluminum for a better bearing surface with a bronze flange bearing and shoulder bolt at the main pivot. I did add the roller bearing to the catch as well which really makes it run smooth. The solenoid has plenty of power to pull the lever. I need to clean up the wiring with some connectorized multiconductor and add a second toggle switch in series and place it at the staging area of the track. The second switch will allow the person staging cars to have the track in either 'SAFETY' or "ARMED' mode to prevent accidental scout activation before the race is ready to start.
![Image](https://lh3.googleusercontent.com/-rdXsivUuYOQ/Vo6B4UIVpjI/AAAAAAAAFJY/un2g0YIcjBw/s640-Ic42/gate.jpg)
![Image](https://lh3.googleusercontent.com/-owhag1sQecs/Vo6B4VRKjTI/AAAAAAAAFJY/Z7_yv0LBoVQ/s640-Ic42/solenoid.jpg)
![Image](https://lh3.googleusercontent.com/-yMC5H_fIHvY/Vo6B4ZMvOpI/AAAAAAAAFJY/_4bokiZux5c/s640-Ic42/button.jpg)
I used the car door lock style actuator, and found it easy to mount with just a plate of 1/8 aluminum attached to the track wit the standard captive nuts and bolts, and then tapped the plate for #6-32 bolts that fit through the mounting holes.
I have this powered by a 12 volt 1.5 amp wall wart. I am running no circuit beyond that and just using it as a manual start gate. Hundreds of activations and it works great. I did make my own start lever out of 3/16" aluminum for a better bearing surface with a bronze flange bearing and shoulder bolt at the main pivot. I did add the roller bearing to the catch as well which really makes it run smooth. The solenoid has plenty of power to pull the lever. I need to clean up the wiring with some connectorized multiconductor and add a second toggle switch in series and place it at the staging area of the track. The second switch will allow the person staging cars to have the track in either 'SAFETY' or "ARMED' mode to prevent accidental scout activation before the race is ready to start.
![Image](https://lh3.googleusercontent.com/-rdXsivUuYOQ/Vo6B4UIVpjI/AAAAAAAAFJY/un2g0YIcjBw/s640-Ic42/gate.jpg)
![Image](https://lh3.googleusercontent.com/-owhag1sQecs/Vo6B4VRKjTI/AAAAAAAAFJY/Z7_yv0LBoVQ/s640-Ic42/solenoid.jpg)
![Image](https://lh3.googleusercontent.com/-yMC5H_fIHvY/Vo6B4ZMvOpI/AAAAAAAAFJY/_4bokiZux5c/s640-Ic42/button.jpg)
Re: Solenoid Start Gate Circuit
Randy, I agree with your comment above as far as the Cub Scout racers go, but some people just want to have everything.gpraceman wrote:Either you will need to control the timer on one COM port and the solenoid on the other or build a port splitter (1 DB9F and 2 DB9M) and wire it up accordingly.
Personally, I favor not activating the solenoid with the computer. I have a remote switch that I plug into my solenoid unit and I call up the racer in the first lane of each heat to start it. They like it, as it gets them more involved in the race.
![Cool 8)](./images/smilies/icon_cool.gif)
Are some (brand/model) timers using the Serial port Pin 4 (DTR) pin, such that it is not available for solenoid control ? Or can a given COM port 'only have one job' ... I am trying to understand.
- gpraceman
- Site Admin
- Posts: 4926
- Joined: Fri Jun 20, 2003 12:46 am
- Location: Highlands Ranch, CO
- Contact:
Re: Solenoid Start Gate Circuit
Timers use pins 2, 3 and 5 (ground). You can use one port for the timer and a solenoid, since the only shared pin would be the ground pin. You would need to make a Y splitter and wire it appropriately to do so.
Sent from my SM-T550 using Tapatalk
Sent from my SM-T550 using Tapatalk
Randy Lisano
Romans 5:8
Awana Grand Prix and Pinewood Derby racing - Where a child, an adult and a small block of wood combine for a lot of fun and memories.
Romans 5:8
Awana Grand Prix and Pinewood Derby racing - Where a child, an adult and a small block of wood combine for a lot of fun and memories.
- gpraceman
- Site Admin
- Posts: 4926
- Joined: Fri Jun 20, 2003 12:46 am
- Location: Highlands Ranch, CO
- Contact:
Re: Solenoid Start Gate Circuit
Randy Lisano
Romans 5:8
Awana Grand Prix and Pinewood Derby racing - Where a child, an adult and a small block of wood combine for a lot of fun and memories.
Romans 5:8
Awana Grand Prix and Pinewood Derby racing - Where a child, an adult and a small block of wood combine for a lot of fun and memories.